Culver Road Bike - 14 Speed - Oat

Designer: Retrospec

$349.00 $559.00

It all starts with the frame...

A lightweight 6061 alloy frame is the foundation for comfortable cycling. Paired with a lightweight threadless steering system, this bike is built to fly.

Shimano drivetrain...

Culver boasts a Shimano drivetrain with 14 speeds for a broad range of gearing and mounted thumb shifters for precise and smooth shifting.

FRAMESET:

6061 alloy classic road ‘double-diamond’ frame, 2 sets water bottle braze-ons Rear rack braze-ons Double rear dropout eyelets Decals protected by clear-coat

WHEELSET:

Rims Retrospec aluminum double-wall 32H, 30mm apex section, precision machined brake tracks with wear indicator
Hubs Aluminum, ball-bearing, 32H, QR Front/100mm & Rear/135mm
Spokes 14G stainless steel
Tires Retrospec 700 x 28C all-season, P/V valves

DRIVETRAIN:

Rear Derailleur Shimano Tourney A070
Front Derailleur Shimano Z500
Shifters Shimano A050 handlebar mounted thumb shifters
Crank Prowheel Alloy 3-piece cranks 2 x 7 - 170mm x 34/50T
Chain KMC Z-series 1/2 x 3/32"
BB Sealed Cartridge 68 x 116mm
Freewheel/Cog Shimano Z500 14-28T, 7S

COMPONENTS:

Headset 1 1/8" (28.6mm) steel, Threadless
Brakes Aluminum alloy dual-pivot side-pull calipers & aluminum brake levers
Handlebars Alloy Drop Anatomic - 420mm width 25.4mm clamp
Grips Retrospec Road Rap
Stem Aluminum alloy Threadless 1 1/8"-ext.90mm x -10d
Saddle Retrospec Road
Seatpost Alloy 27.2mm x 350mm w/integrated seat clamp
Seatpost Clamp Aluminum alloy
Pedals Alloy/Nylon: High Impact, Reinforced Nylon Resin body, Alloy cage, w/toe-clips & straps, 9/16"

A.Rider Height

B.Inseam

C.Top Tube

Size	Height Range	Standover Height
45cm - XS	4'9"-5'1"	30.5"
50CM - S	5'2"-5'5"	31"
54CM - M	5'6"-5'8"	32.5"
58cm - L	5'9"-5'11"	34"

How to measure my inseam for a bike

Your inseam can help you find the perfect sized bike (measuring it properly is similar to pant inseams but measured a little differently). Here's how they work:

Stand upright with your feet 6-8" apart.
Using a tape measure or tailor tape, measure from the bottom of your foot to the top of the inside of your leg.
Compare your inseam measurement to the standover height of the bike. You should have about an inch of space between your body and the top tube.